Yield that feeds security
Every feature ties back to more reliable harvests and traceable care - so communities are less fragile when supply chains wobble.
ABG-V1 reference · Autonomous AI 1.0 · operator dashboard V1
No Plant Is Average (AI for food security).
yieldAI is for growers who want more harvest per square metre, stronger food security, and less mystery in the tunnel. We bridge digital intelligence to physical care - cameras and soil probes to irrigation, snips, and harvest - using ordinary benches, retrofit X / Y / Z gantries, and table hubs you can reach with a wrench. Prefer refurbished workstations, longer-lived parts, and materials chosen for repair? So do we: the product is meant to be affordable to adopt and transparent to audit, with inference on your LAN so your crop data stays yours.
MCP tools · Postgres · MQTT · Pi Flora soil hub · telemetry ingest · operator dashboard (LAN V1) · AI assistant · ABG-V1 reference rig
No Plant Is Average (AI for food security).
Intelligence belongs in the glasshouse, not only in a slide deck.
We design for fair access to serious automation: local data, repairable hardware, and agronomy you can audit, so more communities can grow dependable fresh food close to where it is eaten.
Mission
Climate pressure and urban demand mean we need fresh, local yield without burning the planet on freight - or on endless new silicon. yieldAI is a commercial precision cultivation platform that uses AI where it helps (vision, planning, suggestions) and physical automation where it counts (water, light, motion, harvest logging) - always with records you can show a regulator, a neighbour, or your future self.
The reference path ABG-V1 proves the loop on a real bench: RTSP, BLE soil, PostgreSQL, MQTT motion, MCP-callable tools, and optional on-LAN models so small farms and R&D labs can experiment without renting someone else’s cloud brain by default.
What we stand for
Every feature ties back to more reliable harvests and traceable care - so communities are less fragile when supply chains wobble.
Models meet real leaves, drippers, and gantries. We design for the wet edge - not dashboards that stop at a browser tab.
Favour repairable prints, refurbished PCs for the mainframe where it makes sense, and routes that stay affordable - so good automation isn’t only for the wealthiest glasshouses.
Local data by default, clear audit trails, no mandatory cloud brain - you see what ran, when, and why. Commercial support when you want it; your narrative stays on your farm.
Closed loop
This is the AI-to-physical-world loop: cameras and models see, probes and bench nodes feel, gantry and pumps act, and Postgres logs - so software suggestions always meet something you can touch, weigh, and eat.
RTSP frames, soil and ambient telemetry, reservoir and climate signals - ingested with scope: plant, bed, or whole surface.
The AI interprets the bench through images, labels, and phone sensor telemetry on the LAN, plus on-LAN models and care tooling. Bench phones target on-device vision with clean and labeled feeds to AI; fixed cameras use mainframe inference. Full vision worker for non-phone RTSP is roadmap. Optional LLM calls the same MCP tools a developer would - no shadow APIs.
MQTT motion bridges and irrigation manifolds today; treatments, snip, and harvest actuation stay gated by automation mode, human confirmation, and bench qualification before live moves.
Append-friendly events, job records, yields - powering both compliance narratives and tomorrow's better model (orchestration matures per release).
Field reality
We design for run-of-the-mill houses and standard plant-bed tables - places where sustainable choices (local timber, reused extrusion, hand-built hubs) matter as much as CAD. The gantry retrofits to your structure: full X, Y, and Z travel over the bed so the arm and end effector reach the whole working volume - not a single-axis toy bolted to one side.
The mainframe lives in a cool, dry room - office, equipment closet, or shed nook - while heat, humidity, and spray stay at the bench. At the table, hubs aggregate sensors, host the table brain the gantry plugs into, and run water, medicine, mechanical cuts, and harvest sequences from commands the mainframe issues over the LAN.
Topology
Heavy inference and long-horizon records sit on the mainframe; millisecond-class I/O stays at the edge. Agents and dashboard both read the same truth - Postgres and job semantics do not diverge by UI.
Ubuntu, PostgreSQL, MCP server, telemetry and motion bridges, optional on-LAN LLM, and the yieldAI Agent gateway. Heavy vision on fixed LAN cameras remains roadmap; bench phones already stream and label on-device.
X/Y/Z mechanics, arm, sensor fan-in, pump and valve drivers. Executes only what passed policy and mode gates upstream.
The digital twin is not magic - it is the merged view of telemetry, media, care plans, and events you already store. The dashboard makes it legible.
Architecture page → MCP, MQTT motion, job records (orchestration matures per release), and safety modes.
Software
A stable tool surface for motion, environment, locations, vision, and plants - so any MCP-capable agent on the LAN can reason with real IDs, not hallucinated coordinates.
Three-axis Cartesian volume over the table, carriage and arm
interface, hub-resident real-time control for irrigation and tooling
tied to the same cmd_id and job records as the UI.
PostgreSQL as system of record, MQTT for motion and telemetry bridges, phone RTSP with on-device labels, and a growing fused table scene for the operator dashboard — same ledger as the agent.
Product today
yieldAI is an integrated bench-scale platform, not a slide deck. The public site stays high-level; engineering contracts and tuning numbers ship under commercial terms. Below is the safe summary aligned with our product catalog as of mid-2026.
Local agent gateway with MCP-grounded tools, OpenClaw skills, and on-LAN LLM inference — one honest loop from question to bench data.
LAN greenhouse console: digital twin views, AI assistant with evidence, jobs and tasks, admin settings, and safety mode gates for humans and agents.
Android phone camera agent with on-device labels and streaming; Raspberry Pi Flora BLE soil hub with health visibility; telemetry ingest into the same ledger as the dashboard.
Job records, human physical tasks, and investigation runners — with deeper motion runners and live gantry moves still gated behind bench qualification.
Retrofit X/Y/Z volume over standard benches, table hubs for irrigation and tooling, and a reference mechanical build proving the wet-edge path.
Multi-camera table scenes and production-grade inference on fixed LAN streams — parallel to the phone path already grounding the assistant.
RVO / WBSO reviewers: a password-protected R&D project tracker lists logged hours, milestones, and capability status for grant reconciliation (no engineering secrets). A separate live greenhouse showcase shows a read-only soil and climate snapshot with no control actions.
October 2026 · release 197
Release 197 gives the greenhouse the same deploy, rollback, and daily health check for the bench computer and the table hub. Watering limits, arm motion, and safety limits are unchanged. Operator dashboard 1.95.0. Bench phone 1.7.8 is unchanged.
On the bench phone card and plant twin, Live preview shows a continuous camera view on your greenhouse LAN dashboard.
Take photo and chat-with-frame reuse the same latest picture, so answers refer to what the bench camera sees right now.
Commissioning can assign a bench phone to a table so readings and camera context follow that table even before a plant is paired.
In Assisted mode, a proposed job shows the action, a one-line reason, and Approve or Dismiss on home, table, and plant views.
When a probe sits well below the plant's moisture target, Assisted mode proposes a watering check instead of leaving the dry reading as a note only.
The sensor agent starts more reliably after reboot on current Android benches, and the preview explains when the camera is busy with the stream.
After you pick a greenhouse, open tasks, failures, and pending work reflect that site—not every bench in the fleet.
On wired benches, automatic watering waits for the table hub to report that each pour started and stopped before the job is marked complete.
Integrators receive structured assembly notes, diagrams, and capped first-power checks for table-edge nodes—without exposing grower LAN details on the public site.
Automatic watering on wired benches uses the nominal flow rate of the bench pump, so requested millilitres line up with pour length without manual timing spreadsheets.
When the table hub restarts, the irrigation output stays off until a pour is commanded—so a reboot does not start an unplanned watering cycle. The bench relay's idle state is the default.
After a table-edge hub restarts or runs a full sensor pass, moisture readings resume without the long radio wait that used to stall the service.
Command Center shows how many fresh AI insights apply to the greenhouse you selected—not a fleet-wide total copied into every site.
The soil sensor card explains when a health check does not apply on the dashboard you are already using, instead of reporting the main system as offline.
Needs you still counts every failed job in the greenhouse you opened—including site-wide work and other tables—and the label now says in this greenhouse so the total matches operator expectations.
The bench phone tells you when Android is blocking the camera in the background and when the live stream is actually ready—not a green light while the stream is still starting.
The greenhouse dashboard can still open the bench camera view using the last known stream and shows whether frames are fresh.
After you tap Start camera, the stream stays up without restarting every few seconds on current Android benches.
Live preview and take photo tell you when the bench picture is too dark or obstructed, so you can uncover the lens or turn the bench lights on before asking the assistant.
Chat and vision on the bench skip a black frame instead of inventing plant detail—the assistant asks you to fix lighting first.
When your team enables it, the greenhouse records periodic bench checks from the camera and soil readings, with a clear line on the phone card.
In automatic mode with explicit team approval, at most one limited irrigation per day can be requested, with cooldowns—not open-ended watering.
After the greenhouse arm is physically fitted, commissioning guides now describe safe first-motion checks and joint bring-up in plain language—detailed wiring stays in the integrator portal, not on this public page.
Release 92 adds password-protected guides and a small LAN tool for naming arm outputs during bench bring-up—without publishing wiring or channel detail on this public site.
Release 93 lets your table-edge hub switch irrigation and a grow light on independent daily schedules. Automatic watering still follows the same safety limits as before.
When you add a grow light on the bench, commissioning keeps the irrigation switch separate—so lighting setup cannot overwrite the pump entry your watering jobs rely on.
Release 94 documents dry-run checks, a clear e-stop, and a park pose for integrators fitting the greenhouse arm—detailed wiring and bus setup stay in the password-protected project portal, not on this public page.
Release 95 connects the bench arm to the same supervised control path as other bench jobs: motion stays off until you deliberately enable it, emergency stop and release stay available, and a lost link from the mainframe returns the arm to a safe parked state—protocol and commissioning detail stay in the integrator portal.
Release 96 applies one policy for greenhouse arm requests from your team and from the assistant: joint moves, poses, and park run live only when the site is in automatic mode; emergency stop is always available. Tooling and commissioning detail stay in the integrator portal—not on this public page.
Release 97 keeps arm moves and poses as proposals until a person approves them on the dashboard. After approval, that one move can run even when the site is in manual or assisted mode—emergency stop stays available, and the bench arm still needs your deliberate enable step before it moves.
Release 98 lets the greenhouse turn the bench grow light on or off. An emergency stop turns that light off as well as the pump. A watering command still moves only the pump, and both stay off until you enable them on the bench.
Release 99 lets the greenhouse see whether the bench pump, arm, and sensors are online. That check does not turn them on.
Release 100 adds a second camera beside the phone. The greenhouse can use either view and can show the light at the bench. Temperature and humidity appear when an environment sensor is fitted.
Release 101 can suggest one small arm move from a camera view. A person still approves that move. A cut is only a suggestion.
Release 103 keeps a score for each suggestion after the greenhouse sees what happened. A person can still approve or reject a move. Safety limits stay the same.
Release 104 can file a plant note from a source it cites. Care advice stays a proposal until a person approves it. A short note can be kept without that wait.
Release 105 can propose a change to how a suggestion is made. That change waits until a person approves it, and it can be put back in one step. Safety limits stay the same.
Release 106 writes a short weekly note of scores, approved plant notes, and setting changes. Writing the note does not change how the greenhouse runs.
Release 107 separates hours Tobie confirmed from hours still under review in the password-protected project portal. The public site does not list internal timesheets or engineering detail.
Release 108 reflects progress on the physical greenhouse bench: a finished control box, wiring for irrigation and lighting, and continued commissioning work. Detailed hours and wiring notes stay in the password-protected project portal—not on this public page.
Release 109 keeps confirmed, estimated supervision, and archived estimate lines separate in the password-protected R&D tracker. Each line shows work date, hours, activity, and outcome. The public site still does not publish timesheets or engineering detail.
Release 110 fixes the build for the small USB camera beside the phone so the team can flash it from the greenhouse Pi when needed. Flash steps and wiring detail stay in the password-protected project portal—not on this public page.
Release 111 adds a small on-device preview for the second bench camera: live image, a short sensor summary, or display off. Climate readings on the greenhouse dashboard follow the same rules as before. Setup detail stays in the password-protected project portal—not on this public page.
Release 112 opens a read-only camera page on the greenhouse dashboard: live image, climate tiles, and a clear offline state when the bench link is down. It does not move the arm or change pour settings. LAN setup stays in the password-protected project portal—not on this public page.
Release 113 lets operators save a fixed LAN camera on a table from dashboard settings or the admin portal, test one frame, and point the assistant at that view. It does not move the arm or change pour limits. URLs and credentials stay in the password-protected project portal—not on this public page.
Release 114 clears operator tasks when fresh readings show the problem is gone, and it marks old timed-out work as expired instead of failed. You can reopen a task if you disagree. It does not run irrigation or arm moves on its own. Internal job and health detail stay in the password-protected project portal—not on this public page.
Release 115 lets the dashboard assistant fetch operator records and propose updates from chat. Each change waits on an approval card before it applies. It does not move the arm, run irrigation, or change safety limits. Tool and audit detail stay in the password-protected project portal—not on this public page.
Release 116 keeps greenhouse charts refreshing on schedule, lets you test a saved table camera from the assistant without changing settings, and helps the second bench camera recover when the live stream pauses. It does not move the arm or change pour limits. Setup detail stays in the password-protected project portal—not on this public page.
Release 117 restores the greenhouse dashboard system view: whether background jobs are waiting, whether chart data is fresh, and whether the soil link needs attention. The assistant can use the same high-level summary when you ask what needs care. It does not run irrigation, move the arm, or change safety limits. Internal diagnostics stay in the password-protected project portal—not on this public page.
Release 118 keeps your greenhouse to-dos, schedules, and assistant history on the mainframe so a service restart does not wipe the day's work. The dashboard tells you plainly when the database or message link is down instead of showing empty screens. You can link an unpaired soil probe to a plant from the operator tools. Motion, irrigation, pour limits, and safety gates are unchanged. LAN setup detail stays in the password-protected project portal—not on this public page.
Release 119 lets you press and hold to ask a short greenhouse question on the second bench screen and hear a spoken answer on your LAN. The assistant still cannot move the arm, run the pump, or change safety limits from voice—those actions stay on the dashboard with approval where required. The bench camera stream is more likely to stay up when the message link flickers. Wiring, models, and LAN setup stay in the password-protected project portal—not on this public page.
Release 120 keeps the second bench display responsive while you hold the talk button, so the live view does not freeze during a question. Plant colours on the built-in preview look closer to what the camera sees, and the picture adapts more smoothly when light levels change. Voice still cannot move the arm, run irrigation, or change safety limits. Bench setup detail stays in the password-protected project portal—not on this public page.
Release 121 makes the live preview on the second bench display show plant colour and smooth shading more faithfully in changing light, without changing what voice or the assistant can control. Hold-to-talk and camera streaming improvements from releases 119 and 120 stay in place. Voice still cannot move the arm, run irrigation, or change safety limits. Bench setup detail stays in the password-protected project portal—not on this public page.
Release 122 registers each bench climate unit in the greenhouse dashboard so you can see which sensor is online, rename it for your team, and place it at site or table level. Home shows a calm site climate summary from those sensors. The assistant can read sensor history; moving a sensor to a new table needs your approval. Motion, irrigation, pour limits, and safety gates are unchanged. Wiring and LAN setup stay in the password-protected project portal—not on this public page.
Release 123 lets operators confirm or defer open greenhouse to-dos from a fixed wall display at the entrance. Urgent work is listed ahead of routine checks. The display cannot move the arm, run irrigation, or change safety limits—those actions stay on the dashboard with approval where required. Commissioning detail stays in the password-protected project portal—not on this public page.
Release 124 adds the door display's temperature and humidity readings to the same greenhouse sensor list as your bench climate units, so you can see whether the entrance unit is online without opening a separate screen. Task yes-or-no at the door from release 123 is unchanged. The wall display still cannot move the arm, run irrigation, or change safety limits. LAN and wiring detail stays in the password-protected project portal—not on this public page.
Release 125 lets operators place an unlinked soil probe on a plant from the same greenhouse Sensors list used for bench climate units, and keeps unassigned probe moisture out of watering checks. Climate history is stored at a steady pace so lists stay fast. When a probe misses a radio read, the dashboard suggests battery and range before asking for a hub restart. Motion, irrigation, pour limits, and safety gates are unchanged. Commissioning detail stays in the password-protected project portal—not on this public page.
Release 126 makes the bench unit's on-glass preview and status text read upright in normal greenhouse light, with more natural contrast when you check a plant beside the table. Hold-to-talk and the assistant still follow the same read-only rules as chat—the display cannot move the arm, run irrigation, or change safety limits. Flashing and wiring detail stays in the password-protected project portal—not on this public page.
Release 127 keeps the bench and entrance displays responsive in normal greenhouse light, with steadier live preview and more natural colour when you glance at a plant or confirm a task at the door. Hold-to-talk and yes-or-no at the entrance still follow the same read-only rules as chat—those screens cannot move the arm, run irrigation, or change safety limits. Commissioning detail stays in the password-protected project portal—not on this public page.
Release 128 keeps the bench camera live view responsive right after you power-cycle or update the unit, and lets your team refresh the entrance display software over the greenhouse network once the first install is on the device. Hold-to-talk and yes-or-no at the entrance still follow the same read-only rules as chat—those screens cannot move the arm, run irrigation, or change safety limits. Commissioning detail stays in the password-protected project portal—not on this public page.
Release 129 keeps the greenhouse entrance screen running reliably and updates the door live view more smoothly when you check tasks or glance at the feed on your dashboard. Hold-to-talk and yes-or-no at the entrance still follow the same read-only rules as chat—those screens cannot move the arm, run irrigation, or change safety limits. Commissioning detail stays in the password-protected project portal—not on this public page.
Release 130 orders yes-or-no reminders at the entrance so safety and high-priority checks appear before older routine items, without changing what the screen can do on its own. Hold-to-talk and task buttons still follow the same read-only rules as chat—those screens cannot move the arm, run irrigation, or change safety limits. Commissioning detail stays in the password-protected project portal—not on this public page.
Release 131 lets your team open a read-only wide-angle camera view from the table-edge computer beside the arm on the greenhouse network. It does not move the arm, run irrigation, or change safety limits. Wiring and network setup stay in the password-protected project portal—not on this public page.
Release 132 lets staff hold a talk button beside yes-or-no at the entrance to hear a short spoken answer about the reminder on screen. It does not move the arm, run irrigation, or change safety limits. Setup and commissioning detail stay in the password-protected project portal—not on this public page.
Release 133 lets staff at the entrance hear short spoken answers about greenhouse conditions, what is growing, and what is waiting—without moving the arm, running irrigation, or changing safety limits. Equipment control still belongs on the dashboard. Commissioning detail stays in the password-protected project portal—not on this public page.
Release 134 improves how reliably staff hear spoken answers about greenhouse temperature and humidity when they use hold-to-talk at the entrance. It does not move the arm, run irrigation, or change safety limits. Setup detail stays in the password-protected project portal—not on this public page.
Release 135 lets the system build a read-only table scene from the side, overhead, door, and arm views when cameras are online—so routine table checks stop flagging empty scenes when pictures are available. It does not move the arm, run irrigation, or change safety limits. Commissioning detail stays in the password-protected project portal—not on this public page.
Release 136 shows human follow-up lines from periodic insights on the entrance display beside yes-or-no job cards. Staff tap yes to mark done or no to snooze—without moving the arm, running irrigation, or changing safety limits. Technical setup stays in the password-protected project portal—not on this public page.
Release 207 fixes mainframe database upgrades so the read-only table map from release 206 installs cleanly after the specialist profiles update—without changing watering limits, arm motion, or safety stops. Technical detail stays in the password-protected project portal—not on this public page.
Release 206 gives staff and the greenhouse assistant a shared read-only top-down view of where plants and sensors sit on the table, so daily checks and advice stay aligned with the real layout—without changing watering limits, arm motion, or safety stops. Technical detail stays in the password-protected project portal—not on this public page.
Release 205 adds a Team area on the greenhouse dashboard where staff can chat with read-only specialist assistants and run a short coordinated consult through the greenhouse coordinator—without watering, moving the arm, or changing safety limits. Setup stays in the password-protected project portal—not on this public page.
Release 204 adds an optional scheduled pass that uses only small base turns to capture dated close-up plant photos and plain-language health notes for staff follow-up—without watering, moving other arm joints, or changing safety limits. It stays off until explicitly enabled in the password-protected project portal—not on this public page.
Release 203 stores five read-only greenhouse specialist roles so later chat and phone workflows know who may read plants, climate, sensors, or yield data and when to ask staff for help at the door—without watering, moving the arm, or changing safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 202 lets staff run the table hub morning health check directly on the Raspberry Pi, improves arm camera commissioning on the bench LAN, and surfaces dead soil probes as one clear alert on the bench daily report—without changing watering limits, arm motion, or safety stops. Technical detail stays in the password-protected project portal—not on this public page.
Release 201 lets automatic and staff-triggered pours on the demo strawberry bench run a bit longer when flow is slow, so moisture can catch up without extra daily pours. Daily pour count, soak timing, arm motion, and safety stops are unchanged. Technical detail stays in the password-protected project portal—not on this public page.
Release 200 helps the table hub regain greenhouse network connectivity within a few minutes after a Wi-Fi drop, without changing watering limits, arm motion, or safety stops. Technical detail stays in the password-protected project portal—not on this public page.
Release 199 keeps the entrance door camera view available in table checks after a software restart, without changing watering limits, arm motion, or safety stops. Technical detail stays in the password-protected project portal—not on this public page.
Release 198 makes repeat software updates to the bench and table hub more dependable after the first install, without changing watering limits, arm motion, or safety stops. Technical detail stays in the password-protected project portal—not on this public page.
Release 197 adds the same deploy, rollback, and daily health check for the bench and table hub, and keeps checking that the bench pump really switched off after watering or a network drop before the next pour. It does not change watering limits, arm motion, or safety stops. Technical detail stays in the password-protected project portal—not on this public page.
Release 196 refreshes the password-protected project tracker so weekday research oversight from October shows a work date, hours, a plain activity line, and an outcome suitable for grant reconciliation. It does not change irrigation, arm motion, or safety limits on the bench. Detailed timesheets stay in the password-protected project portal—not on this public page.
Release 195 keeps automatic bench observations on record when an old reminder still names a plant that was removed. It does not change watering, arm motion, yes-or-no behaviour, or safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 194 keeps entrance follow-up cleanup working when a plant is removed from the bench, without changing yes-or-no behaviour, irrigation, arm motion, or safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 193 arms a hardware timer on the bench pump relay for each pour, confirms it on the local network, and re-applies the timer after Wi-Fi recovery. It does not change watering limits, arm motion, or the emergency stop. Technical detail stays in the password-protected project portal—not on this public page.
Release 192 merges repeated staff reminders at the entrance into one card per plant or table issue, so yes-or-no lists stay short when insights rerun. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 191 keeps the table hub running when the greenhouse Wi-Fi drops for a moment, and checks on the local network that the pump really switched off before a watering counts as finished. It does not change watering limits, arm motion, or the emergency stop. Technical detail stays in the password-protected project portal—not on this public page.
Release 190 fixes the password-protected project tracker so monthly hours in the overview chart use normal punctuation between the month name and confirmed, derived, and not-reviewed totals. It does not change irrigation, arm motion, or safety limits on the bench. Detailed timesheets stay in the password-protected project portal—not on this public page.
Release 189 keeps the table hub and automatic watering checks steady when Wi-Fi drops, and only treats a watering run as successful after the pump confirms it ran. If confirmation fails twice, staff see a plain follow-up to check the reservoir and pump—without changing arm motion or safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 188 fixes the password-protected project tracker so reviewers can open yieldai.farm/tracker and sign in without a trailing slash; the activity log and exports load as before. It does not change irrigation, arm motion, or safety limits on the bench. Detailed timesheets stay in the password-protected project portal—not on this public page.
Release 187 adds a read-only public page at yieldai.farm/showcase with sanitized soil readings, bench climate, a plain grow report, and plant photos refreshed from the on-site greenhouse. It cannot move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 186 refreshes the password-protected project tracker so each research line shows a work date, hours, a plain one-sentence description, and a short outcome suitable for grant reconciliation. It does not change irrigation, arm motion, or safety limits on the bench. Detailed timesheets stay in the password-protected project portal—not on this public page.
Release 185 adds plant health and growth photo pages on the greenhouse LAN dashboard so staff can review soil probe readings, spot quiet probes, and scroll daily plant photos. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 184 refreshes the password-protected project tracker so each research activity shows a work date, hours, a plain description, and an outcome line suitable for grant reconciliation. It does not change irrigation, arm motion, or safety limits on the bench. Detailed timesheets stay in the password-protected project portal—not on this public page.
Release 183 keeps demo site moisture and climate trend charts aligned with the plant readings staff see during training walkthroughs. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 182 shows Basil and Lettuce on the demo table map during staff training so walkthroughs match how operators see live benches. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 181 labels soil feed-strength on live bench climate summaries with the same unit wording operators already see on dashboard tiles and in training demos. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 180 keeps soil, hub, and job status polling reliable on the bench probe placement page so commissioning teams see matching hub health while mapping sensors. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 179 uses the same feed-strength unit wording on every demo plant row so training walkthroughs read consistently beside Basil and Lettuce. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 178 keeps Basil feed-strength and climate trend charts aligned in demo training mode so staff walkthroughs match what growers see on live benches. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 177 restores live soil and hub status on the bench probe placement page so your team can map sensors while commissioning. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 176 refreshes the password-protected project tracker so stated summer research hours and each activity line show a clear work date, hours, activity, and outcome for formal review. It does not change irrigation, arm motion, or safety limits on the bench. Detailed timesheets stay in the password-protected project portal—not on this public page.
Release 175 updates the password-protected project tracker with monthly hours and research focus-area summaries so grant reconciliation is easier. It does not change irrigation, arm motion, or safety limits on the bench. Detailed timesheets stay in the password-protected project portal—not on this public page.
Release 172 turns bench climate readings into plain-language asks on the entrance display. Staff answer yes or no; the system tracks what improved without turning on irrigation, lights, or arm motion on its own. Technical detail stays in the password-protected project portal—not on this public page.
Release 171 lets your team open a greenhouse-LAN page beside the arm to see the wide-angle view and take small supervised joint steps during setup. Motion stays off until you explicitly enable it. It does not run automatic arm jobs, irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 170 refreshes demo greenhouse training data so plant and table views show soil feed-strength and species reference notes during staff walkthroughs. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 169 keeps automatic bench check records reliable and clears duplicate or stale staff follow-up lines on the next insight pass. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 168 shows moisture, soil temperature, and light for each linked probe on the strawberry bench, with staff hints when air, feed, or placement need attention—without changing automatic watering rules. It does not move the arm or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 167 refreshes demo greenhouse plant twin and table views so basil and lettuce each show their own insight line and up-to-date environment readings during staff walkthroughs. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 166 gives basil and lettuce their own short insight summaries in demo greenhouse mode so training walkthroughs show two different plant conditions instead of one repeated story. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 165 adds short narrative summaries to demo greenhouse insights so staff reviewing the operator dashboard Health tab see plain-language context for the site, table, and plants. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 164 adjusts spacing on compact environment tiles on the operator dashboard Health tab so lux labels sit clearly beside the number, like humidity and other channels. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 163 labels light readings in lux on bench and table views so staff can compare conditions at a glance, and refreshes demo mode so training screenshots show realistic phone presence. It does not move the arm, run irrigation, or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 162 improves how the lab records automatic watering: repeat requests in the same soak window do not look like extra pours, and auto-watering pauses with one staff follow-up when soil moisture does not rise after two tries. It does not move the arm or change safety limits. Technical detail stays in the password-protected project portal—not on this public page.
Release 161 refreshes the password-protected project portal so logged hours match work Tobie confirmed, and draft progress files open reliably on the hosted admin environment. It does not change irrigation, arm motion, or safety limits on the bench. Engineering detail and timesheets are not published on this public site.
Release 160 refreshes the password-protected project portal with dated R&D activity, draft progress summaries, and evidence photos for formal review. It does not change irrigation, arm motion, or safety limits on the bench. Engineering detail and timesheets are not published on this public site.
Release 159 lets the table sensor hub retry on its own when connectivity fails, with waiting periods between steps so a quick glitch does not force a full power cycle. It does not run irrigation, move the arm, or change safety limits. Detail stays in the password-protected project portal—not on this public page.
Release 158 replaces a long list of duplicate sensor checks at the entrance with one high-priority reminder to restore the table soil link, and clears it when readings return. It does not run irrigation, move the arm, or change safety limits. Detail stays in the password-protected project portal—not on this public page.
Release 157 lets automatic watering on a shared table use fresh soil readings when the bench phone app is not connected, with the same wait times and safety limits as before. It does not move the arm or change operator safety settings. Detail stays in the password-protected project portal—not on this public page.
Release 156 stops quoting old moisture for quiet probes, names the driest and wettest live plants when several are reporting, and keeps watering guidance aligned with the bench median. It does not run irrigation, move the arm, or change safety limits. Detail stays in the password-protected project portal—not on this public page.
Release 155 keeps hold-to-talk answers on the bench and at the entrance focused on live plant moisture and names you already use in the greenhouse, instead of reading generic alert summaries first. It does not run irrigation, move the arm, or change safety limits. Detail stays in the password-protected project portal—not on this public page.
Release 154 keeps hold-to-talk questions going when the network briefly stalls, and answers with current plant moisture and greenhouse climate instead of generic alerts. It does not run irrigation, move the arm, or change safety limits. Detail stays in the password-protected project portal—not on this public page.
Release 153 watches each soil probe separately and checks that the arm wide-angle view is still updating, then opens a single maintenance reminder with plain steps when something needs hands-on attention. It does not run irrigation, move the arm, or change safety limits. Detail stays in the password-protected project portal—not on this public page.
Release 152 lets technicians adjust one arm joint at a time with gradual steps and remembered positions during greenhouse-network setup, without an automatic snap to a default rest pose that could jolt hardware. It does not change day-to-day watering, scheduled arm jobs, or operator safety settings. Detail stays in the password-protected project portal—not on this public page.
Release 151 adds gentle background checks that restart table and server services when soil or climate readings go quiet, and surfaces a clear operator task when hardware needs hands-on help. It does not run irrigation, move the arm, or change safety limits. Detail stays in the password-protected project portal—not on this public page.
Release 150 keeps automatic watering on tables that share one pump aligned with a single bench policy, so staff are not pulled between conflicting automatic suggestions. You can still approve a pour or run a capped pulse by hand. It does not change emergency stop or turn on irrigation without your existing safety settings. Detail stays in the password-protected project portal—not on this public page.
Release 149 lets your team store simple orientation rules so live preview, snapshots, and assistant vision show the table the way operators expect when a phone or fixed camera is mounted on its side. It does not move the arm, run irrigation, or change safety limits. Detail stays in the password-protected project portal—not on this public page.
Release 148 marks a supervised look-around as unsuccessful when the arm camera shows the same picture at different turn angles—often a loose cable—so your team fixes the view instead of filing stale photos. It does not move extra joints or change watering rules. Detail stays in the password-protected project portal—not on this public page.
Release 147 lets your team run a slow, narrow base rotation to photograph the table from the arm camera and fixed bench views when you deliberately enable it—only in automatic mode or with operator approval, never during watering, and with emergency stop unchanged. It does not move the whole arm or turn on autonomous picking. Detail stays in the password-protected project portal—not on this public page.
Release 146 reflects live greenhouse commissioning: strawberry plants on the demo bench, irrigation and soil sensing checked after install, and a short end-to-end exercise so staff know the table is ready for the season. It does not change safety limits or turn on automatic watering by itself. Detail stays in the password-protected project portal—not on this public page.
Release 145 treats each demo bench table as one irrigation zone when deciding whether to water, so a single dry pot does not trigger a spray that would soak the rest. Wet readings block an automatic run, and time between runs stays bounded. It does not turn on irrigation without your existing safety settings. Detail stays in the password-protected project portal—not on this public page.
Release 144 helps the entrance display stay reachable after reboots and gives operators a clearer picture when the unit restarted unexpectedly—without moving the arm, running irrigation, or changing safety limits. Technical setup stays in the password-protected project portal—not on this public page.
Release 143 helps the demo bench confirm the pump has stopped after a pulse, so operators see fewer false off alarms when the hub double-checks the bench switch—without moving the arm or changing safety limits on production sites. Technical setup stays in the password-protected project portal—not on this public page.
Release 142 adds a bounded pump pulse on the demo greenhouse command center so staff can run a brief irrigation check and see when the bench confirms—without moving the arm or changing safety limits on production sites. Technical setup stays in the password-protected project portal—not on this public page.
Release 141 shows live light readings from each soil probe on the pairing page and highlights the darkest one—helpful when checking shade or placement beside the bench—without moving the arm, running irrigation, or changing safety limits. Technical setup stays in the password-protected project portal—not on this public page.
Release 140 keeps the name and bench plant you already chose visible when the pairing page refreshes after a scan—without moving the arm, running irrigation, or changing safety limits. Technical setup stays in the password-protected project portal—not on this public page.
Release 139 lets the table hub share the Bluetooth radio fairly between pairing and routine soil checks, and waits before retrying probes that are out of range—without moving the arm, running irrigation, or changing safety limits. Technical setup stays in the password-protected project portal—not on this public page.
Release 138 improves greenhouse-network pairing: bench plants follow the live table name, scans show probes before readings fill in, and a busy radio returns a plain retry message—without moving the arm, running irrigation, or changing safety limits. Technical setup stays in the password-protected project portal—not on this public page.
Release 137 lets staff on the greenhouse network scan identical soil probes, flash the one they are holding, and link it to a bench plant—without moving the arm, running irrigation, or changing safety limits. Wiring and pairing detail stay in the password-protected project portal—not on this public page.
Operators
The greenhouse dashboard (first-party operator UI on your LAN) shares the same truth as the agent: a plant's digital twin, vision timelines, a chat-first AI assistant with evidence-backed replies, and an audit trail for every pour, cut, or move — so sustainability and food-safety stories stay grounded in data, not vibes.
Lab capture
Lab capture
Lab capture
System blueprint
Lab capture
Lab capture
See it move
A short product walkthrough: planning, sensing, and actuation on every bench — without mandatory cloud inference.
Watch on architecture page →One scroll through identity, stage, care plan, linked pathology references, and the numbers that actually drove the last suggestion - not a spreadsheet zoo.
Bench phones stream and label on-device; the assistant can ground replies in live snapshots and sensor context. Fixed-camera fusion for every table remains on the roadmap.
Motion, chemistry, harvest: parameters, initiator, outcome. Same rows the agent sees; the difference is typography, not truth.
Full operator UI specification ships with commercial and pilot packages - aligned with the same safety and mode gates as the agent.
Creator
Creator & technical founder · yieldAI
Tobie Alberts is the creator and technical founder of yieldAI, building bench-scale precision cultivation from Delft, Netherlands. With nearly two decades leading edge IoT, responsible AI, and large-scale customer intelligence platforms — including CTO roles at Intent HQ and IoT.nxt — he brings enterprise-grade systems discipline to greenhouse automation: local inference, repairable hardware, MCP-grounded agents, and audit trails growers can trust.
yieldAI is his WBSO-backed R&D path to connect AI models to real leaves, drippers, and gantries — not slide decks. He holds certifications in ethical hacking and computer forensics, reflecting a commitment to secure, transparent design from sensor to harvest.
Documentation
yieldAI is documented as an integrated platform: motion and telemetry contracts, MCP tool manifests, roadmap vision slices, and the operator dashboard spec are written to the rigour you expect in a regulated facility, and delivered with commercial packages and partner engagement. Field firmware packages ship per engagement.
Greenhouse layout, edge devices, environmental boundaries, and how physical I/O maps into the data model.
MQTT motion, telemetry ingest, job orchestration, safety modes, database schema, and release slices - single source of truth for integrators.
Digital twins, media timelines, suggestions, and audited actions - the human layer over the same Postgres ledger as automation.
Partners
yieldAI is a precision cultivation platform delivered as an integrated offering: hardware integration, software, updates, and optional professional services. We work with growers, integrators, and food security programmes that want dependable automation and traceable operations on the bench.
No Plant Is Average (AI for food security) is our compass: partnerships rooted in real harvests, local resilience, and agronomy you can stand behind.
If you are exploring pilots, OEM or integration, or investment, start with the founder profile below or your usual business introduction channel.
No Plant Is Average (AI for food security)
Sustainable hardware choices, local inference, and traceable yield, packaged as a product you can stand behind in the market.
Talk to us about pilots